Sludge Case Study
Drying of pickling sludge
Updated on
Back to case studies listings
Sponsored listing
Drying of pickling sludge
Implementation of the Benenv sludge dryer to pickling sludge at Jiangsu Langshan Steel Rope Co., Ltd, Nantong, Jiangsu/China.
Nantong, Jiangsu/China
Asia
Benenv
-
Thickening, dewatering & drying
- Drying
- Industrial Sludge
Case study description
Implementation of the Benenv sludge dryer to pickling sludge at Jiangsu Langshan Steel Rope Co., Ltd, Nantong, Jiangsu/China.
- Device model: BRD-300
- Type of sludge treated: Pickling sludge
- Processing capacity: 450kg/h
- Project date: December 2019
- Inlet water content: 80%
- Mud water content: 30%
- Reduction rate: 72%
Company's role in the project
Drying the sludge from steel rope industry, to meet the standard disposal to landfill.
Products used
- Benenv sludge dryer BRD-300
Gallery
Other directory listings from Benenv…
Case Study
Pharmaceutical sludge dewatering
Sponsored listing
View case study
Product
The Wave Separator for thickening and dewatering
Sponsored listing
View product
Product
Multi-disk screw press for thickening and dewatering
Sponsored listing
View product
Service
Sludge treatment equipment supply
Sponsored listing
View service
Case Study
Faecal sludge treatment solution
Sponsored listing
View case study
Case Study
Biological sludge treatment − overall solution
Sponsored listing
View case study
Case Study
Sludge carbonization − pig manure
Sponsored listing
View case study
Back to case studies listings
About this page
This page was last updated on 24 November 2021
Disclaimer
Information on this page may have been supplied by third parties. You are reminded to contact any third parties to confirm information is accurate, up to date and complete before acting upon it. SludgeProcessing.com accepts no liability for information provided by third parties, actions taken on the basis of this information or information held on third-party websites.
